|
Note This procedure is not intended to replace any model-specific use and care documentation that may have been provided by the manufacturer of your sensor. |
To Scan Your Finger with the Finger Sensor:
•Place your index finger gently but firmly in the middle of the oval sensor area. If login is successful, your display name appears on the upper left of the screen.
|
Hint Pressing too hard will cause the fingerprint to be distorted, while too little pressure will not allow enough of your finger to contact the sensor surface. |
If you are having difficulty scanning your finger successfully, try the following:
•Unplug the sensor (if possible) and then plug it back into the same outlet (this causes the device to re-register).
•Re-register your fingerprint in Store Manager (this is typically a manager function).
|
Note If your Finger Scanner hardware ever becomes disabled, you can press CTRL + U on the keyboard while in Terminal to activate the User ID login method. |
See also:
